Bearifi BearExtender Turbo PC (dual band model) Windows Support

Get support for your Bearifi Turbo PC (dual band model) for Microsoft Windows Computers. This page is just for our Bearifi Turbo PC (dual band model).

Native support on Windows 10 & 11

If you are running Microsoft Windows 10 or 11, your Bearifi Turbo PC may be natively supported and you may not need to install drivers. To check, plug the product to your PC's USB port and see if you have a WiFi 2 option as in this graphic:



The above assumes your PC has a built-in WiFi card. If it does not, then you should just see available WiFi networks instead of the WiFi/WiFi 2 choice. In some cases if you have used another USB WiFi product on the PC, the number may appear as WiFi 3 or WiFi 4.

If you see WiFi 2, this represents your Bearifi Turbo PC and you can pick out a network below to connect. If you unplug Bearifi Turbo PC from your PC, the WiFi 2 will go away, but will reappear the next time you plug it in.

If you do not see WiFi 2, or you have an older version of Windows, please download the file below and run the setup application inside.

This is for Microsoft Windows, Vista, 7, 8, 10, and 11. After downloading this file, open it and run the Setup Application inside.

 


Setup Guide & Manual

Click below to download the installation and user guide (PDF) for your version of Windows.

Windows Vista, Windows 7, Windows 8/8.1

Windows 10/11 User Guide


For Linux Driver and Instructions


Contact Support

We are here to help. Please contact us right away if you have any problems or questions with your BearExtender. Our support staff is 100% based in the U.S. and we reply to emails typically within 6-12 hours.

Email: support@bearifi.com

For Telephone support, click here.